Social Icons

Pages

NEC BASIC PROGRAMMING TUTORIAL



   

      1.    TIME                    10-01-01
      2.    SYSTEM NUMBERING        11-01-01=2
      3.    EXTENSION NUMBERING     11-02-01
      4.    CID                     15-03-09
      5.    EXTENSION NAME          15-01-01
      6.    ICM                     20-02-12=1
      7.    TRUNK LINE SETTING      14-07-01
                                    0= no access
                                    1= outgoing only
                                    2= incoming only
                                    6= incoming and outgoing
                                    7= incoming and outgoing when on hold
      8.    EXT: ring group setup   22-04-01=200
      9.    Trunk rign group setup  22-05-01
            ICTS                    22-02-01=4 (FOR DIL)
            Normal IR setup         22-06-01
            DIL assignment          22-07-01
            DIL no ans: destination 22-08-01
            DIL no ans: time setup  22-01-04
           
      10.   TIME MODE               20-02-01=1
      11.   OUTGOING CALL           14-01-07=1
      12.   CALLER ID               14-02-10=1
      13.   DTMF                    14-02-01=2
      14.   TRS                     21-04-01
                                    21-05-01:CL1=TB=0
                                    : CL2=TB=1
                                    : CL3=TB=0
                                    : CL4=TB=0
                                    : CL4=TB=0
                                    21-05-08:CL1=TB=0
                                    : CL2=TB=0
                                    : CL3=TB=1
                                    : CL4=TB=2
                                    21-06-01:CL1=TB=00
                                    21-06-07:
                                    : RES1-01=0
                                    : RES1-02=2
                                    : RES2-01=0
                                    : RES3-01=0
                       
      15.   DIAL BLOCK             20-08-08=1, 21-04-01=CL-1 (BLOCK=00
                                    21-09-01=TR-2
                                    21-10-01=TR-2
                                    21-06-07=RES1=01=1
                                    21-04-01=CL-2 (BLOCK=0
                                    21-09-01=TR-3
                                    21-10-01=TR-3
      16.   DIAL BLOCK RELEASE      90-19-01
      17.   Trunk naming            14-01-01
      18.   Trunk group             14-05-01
            Music source setup      10-04-01
            Music source for trunk  14-08-01
      19.   Trunk acc: map for ext: 15-06-01
      20.   Ring tone setup for ext:15-08-01
      21.   Conversation record     15-12-01
      22.   DSS EXT: Assignment     30-02-01
      23.   DSS key assignment      30-03-01
      24.   Trunk access code       11-09-01=9
      25.   COS FOR EXTENSION       20-06-01
      26.   OPERATOR EXT: SETTING   20-17-01
      27.   VRS RECORD/ERASE        11-10-20=716
      28.   DISA/DID                25-02-01=1
      29.   VRS SETTING             22-02-01: 1
      30.   VRS MESSAGE SETTING     25-02-01 talkie type: 1 message no: 1
      31.   VRS record              25-06-01 message no.1:106 received dial 1
      32.   Topaz in SL1000         99-03-60=1

      33.   Trunk ring tone setup   22-03-01=0, 1, 2

19 comments:

  1. Unknown1 December 2013 at 07:21

    very good

    ReplyDelete
  2. Nec Phone programming5 May 2014 at 04:10

    Thanks for your NEC tutorial and i really appreciate your NEC phone programming tutorials. If u another update regarding this technology so please confirm me @inlinecom

    ReplyDelete
  3. Unknown17 February 2015 at 02:41

    Thank you, Can you guide me hot to install inmail/voice mail on SL1000

    ReplyDelete
  4. Unknown10 March 2015 at 23:18

    Thanks a lot for this tutorial.... Can you please guide me or teach me of how to program this NEC SL1000 to activate/program the Paging System of this model?

    ReplyDelete
  5. Anonymous22 March 2015 at 23:01

    Any tutorial on how to configure NEC SL1000 to use SIP trunk when making outgoing calls? Noobie here. Thanks!

    ReplyDelete
  6. Praveen23 April 2015 at 04:20

    Hai i want to block mobile number only by keeping local land-line active

    ReplyDelete
    Replies
    1. Praveen16 January 2016 at 23:28

      go to 21-04 : Toll Restriction Class for Extensions
      & go to corresponding extension then you can put 3 on mode 1. then apply

      Delete
  7. Shah Rukh7 May 2016 at 22:16

    Hi Parveen I want to block 0 for International calls

    ReplyDelete
  8. Anonymous16 May 2016 at 02:45

    i am struggling with my un-user friendly SL1000.
    Can some one please tell me how do i unblock dialing international numbers ?

    ReplyDelete
  9. Unknown1 August 2016 at 21:38

    Hai
    i want to block mobile number and unblock with password only . keeping local land-line active

    ReplyDelete
  10. Unknown8 July 2017 at 04:19

    i have the old analog NEC phone.can anyone please tell me how to block calling mobile in one extension

    ReplyDelete
  11. Akjiwani3 August 2017 at 23:19

    This comment has been removed by the author.

    ReplyDelete
  12. Akjiwani3 August 2017 at 23:20

    Also need to block '0' dialing with a password, pls provide details, concern will be appreciated

    ReplyDelete
  13. Akjiwani3 August 2017 at 23:26

    Hot line working for all users, except 1, he is not able to do hotline calls, pls help

    ReplyDelete
  14. Anonymous22 August 2017 at 03:31

    Hello sir, I'm having a problem with my NEC SL1000..
    When I call remote pabx (using voip feature) it just rings on the other side and no voice can be heard..

    please help me sir.. Thank you!

    ReplyDelete
  15. atif xhaikh7 January 2019 at 03:33

    That appears to be excellent however i am still not too sure that I like it. At any rate will look far more into it and decide personally!
    IP PBX System

    ReplyDelete
  16. Hamza Alhamedi27 February 2020 at 00:07

    i need to block mobile call

    ReplyDelete

Subscribe to: Post Comments (Atom)